|
Item |
Model No. |
Picture |
Spec. |
|
Automatic
Exposure Machine |
HTE-178SRH-AT-P |
 |
Width of
FPC : 250mm
Thickness of FPC : 50~200㎛
Shaft Bobbin Diameter : 3"
Light Source : 5.0kw Short Arc Lamp
Exposure Area : 260X260mm
Alignment Accuracy : +/-5㎛ |
|
HTE-178SR-HC |
 |
Thickness
of FPC : 50 ~ 280㎛
Width of FPC : 250~500mm
Diameter of FPC roll : 300mm
Weight of FPC roll : 50kg
Bobbin Internal Diameter : 3" or 2"
Light Source : 5kw Short Arc Lamp
Collinmation Angle : under 1.5'
Declination Angle : under 1.0'
Exposure Area : 500X600mm
Intensity of Illumination : 85% or more,
in Exposure Area
Lamp Life(Average): 700hours
Output Wave Length(max.) : 300~400nm |
|
HTE-5300HC-II |
 |
Board Size
: 250 x 250mm ~ 610 x 610mm
Board Thickness : 0.05 ~ 2.0mm
Light Source : 5kw Short Arc Lamp
Collinmation Angle : under 1.5'
Declination Angle : under 1.0'
Intensity of Illumination : 85% or more,
in Exposure Area
Lamp Life(Average): 700hours
Output Wave Length(max.) : 300~400nm
Alignment Accuracy : ±5㎛(Repeatability)
Confirmation Accuracy : ±20㎛(After
Vacuum Contact) |
|
수동 노광기 |
HTE-5102S |
 |
Board Size
: 250 x 250mm ~ 610 x 610mm
Light Source : 5kw Short Arc Lamp
Collinmation Angle : under 1.5'
Declination Angle : under 1.5'
Intensity of Illumination : 85% or more,
in Exposure Area
Lamp Life(Average): 700hours
Output Wave Length : (365, 405, 436)nm
Exposure Control : By UV
Integrator(914M) |
|
THE-7000MC |
 |
Exposure
Light Source : 7.0KW Metal Halide Lamp
Frame Area : MAX 640 x 810mm
Exposure Method : Vacuum Contact
Upper - Glass, Lower - Mylar film
Intensiyu Of Illumination : 80%
Exposure Control : By UV Integrator
Water Cooling Equipment : 20ℓ/min(15℃) |
|
R T R
Laminator |
DFW-510-RC |
 |
Laminator
Effective Width :150~510mm
Laminator Speed : 0.3~3.0m/min
Air Supply : 0.4Mpa
Pressure Application Method : Air
Cylinder
Film Shaft : 3" Air Shaft
Device Dimensions : W1310 x D2200 x
H1700mm
Laminator Temperature Control Range :
(Room T ~ 150'C)
Laminator Roll : infrared Heater Tube |
Services
